Grp Water Tank

GRP Sectional Panel Tanks are constructed of panels made from SMC(Sheet Molding Compound) by hydraulic hot press under high temperature (150℃) and pressure conditions to maintain the best endurance.
Using stainless steel for the interior structure and plated steel for the exterior, the panel exhibits excellent resistance to erosion. Easy installation with on-site bolt assembly and Tank shape and volume can be freely designed with no restrictions based on site location, weather or climate.

Comparison

Feature 1. Super Hygienic

In compliance with WRAS (Water Regulation Advisory Scheme) making with the quality of material which is hygienic passes a taste, a smell and a poisonous etc. 5 kind test being a water tank, was verified. It is possible to make the GRP panels in a variety of colours. In most cases, however, this type of tank is installed in the open, exposed to direct sun -light. If the GRP panels are translucent, the growth of algae and other micro-organisms would be accelerated.

After extensive testing and research, S&B TECH has adopted panel to minimize this problem, completely opaque and does not permit the passage of any light through it. A typical problem with steel tanks has always been the high thermal conductivity and expansion of coefficient of steel. These characteristics can cause loosening of the panel connecting bolts in areas of wide temperature change

Feature 2. Free capacity can be designed

- Various sized panels can make the below tanks that utilize the most horizontal and perpendicular space and also can be erected from small capacity tank to huge tank.
- S&B offers panel tanks from 0.25M up to a maximum of 10,000M

- When installing the basement of pillar, avoiding obstacles, “ㅁ” “ㄱ’ “ㄴ”shape, Freely as can be installed.

Feature 3. Safety of Bottom Panel for Water Pressure

- The convex panel can be the water pressure created by filling the tank seals the joint preventing leakage.
- In other type tanks, water pressure can loosen the joint breaking the seal and allowing the stored water leak out.

Feature 4. Perfect watertighness

The joint are sealed with a special sealing tape for GRP sectional panel water tank it maintains soft itself and adhesives even at low temperature.

Feature 5. Complete Drainage

- The convex bottoms with a concave drain panel system make sure complete and fast drainage.
- It’s very useful to take a maintenance inside of water tank.

GRP Panel Production Process